Commercial Roofing in Aledo, Texas
Low-slope and flat roof systems for business and institutional property across Aledo, Willow Park and the I-20 corridor.
Low-Slope Roofs Fail Differently
Commercial roofing in Aledo is a different discipline from residential work, and the commercial buildings in Parker County are mostly underserved because of it. A low-slope roof does not shed water, it holds it and drains it, which means ponding, seam integrity, drain function and the flashing around every rooftop unit matter more than anything happening in the field. Aledo Roofing Pros works on shops, offices, small warehouses, churches and mixed-use buildings across the area, in mechanically attached TPO, modified bitumen and restoration coatings. The other difference is that a commercial roof sits over an operating business. Scope, sequencing and noise windows get planned around your hours, your tenants and your rooftop equipment before a crew is scheduled, not afterwards.
What Commercial Work Covers
A commercial roof is a system with drainage, penetrations and terminations. Each of these is surveyed, priced and documented separately.
Full roof survey with a drawn planWe map the roof, mark every penetration, unit, drain, scupper and seam run, and note where the ponding sits after a rain. You get a marked-up plan alongside the photographs, which is a far more useful document for a facility manager than a written description.
Core sampling where the assembly is unknownOn an older building nobody knows what is under the membrane. A core tells us how many layers are up there, whether the insulation is saturated and whether the deck will take a new system, which decides between recover, tear-off and coating.
Mechanically attached TPO installationSingle-ply TPO with hot-air welded seams, fastened to the deck on the manufacturer's pattern for the building's wind zone and height. Seam welds are probed rather than assumed.
Modified bitumen systemsTwo-ply modified bitumen where the building or the use calls for a more robust, more repairable surface than single-ply, particularly on roofs with heavy foot traffic around equipment.
Restoration coatingsWhere the existing membrane is sound and the insulation is dry, a silicone or acrylic restoration coating can extend service life for a fraction of a tear-off. We only recommend it when the core sample supports it, and we say plainly when it does not.
Drain, scupper and ponding correctionBlocked or under-sized drains and low spots holding water are the root cause behind a large share of commercial roof failures. We clear and reset drains, add tapered insulation where a low spot warrants it, and document the ponding pattern.
Rooftop unit and curb flashingHVAC curbs, exhaust fans, conduit and pipe supports are the highest-risk detail on a commercial roof. Each one gets flashed properly rather than mastic-patched, and we coordinate with your mechanical contractor where a unit has to be lifted.
Parapet, wall and termination detailBase flashing up the parapet, counter flashing or termination bar at the top, and coping treatment. Wall terminations are where wind-driven water enters on a low-slope roof.
Work sequenced around your operating hoursTear-off noise, crane or hoist scheduling and access routes are planned against when your building is occupied and when deliveries arrive.
Maintenance documentation for the fileCompleted-work photographs, the marked-up plan and the written warranty terms, in a form that survives a change of facility staff.
How a Commercial Project Runs
Survey, cores and the plan
We walk and map the roof, sample the assembly where its history is unknown, photograph every detail and document the ponding and drainage behaviour. For a typical small commercial building in Parker County this is a half-day exercise and it produces the marked-up plan the rest of the project runs on. There is no charge for it.
Options priced side by side
You get the realistic choices, recover, full tear-off and replace, or restoration coating, each as its own line-item estimate with an expected service life attached. Showing all three lets you weigh capital cost against how long you intend to hold the building, which is the decision you are actually making.
Scheduled, sequenced installation
Work is broken into sections so the building is never broadly exposed, sequenced around your hours and coordinated with any trades that need roof access. Seams are probed, details are photographed as they are completed, and the closeout package goes to whoever keeps your building file.
Why Commercial Owners Here Work With Us
We core before we recommend
Recommending a coating on a roof with saturated insulation underneath is how a cheap fix becomes an expensive one two years later. A core sample costs very little and it is the difference between a recommendation and a guess.
Three options, priced, not one
Recover, replace and coat carry very different costs and very different service lives. You get all three with the numbers attached, because the right answer depends on how long you are holding the building and that is not our call to make.
Your operation is part of the scope
We plan around occupancy, deliveries, tenant hours and rooftop equipment before we schedule crews. A commercial roof job that disrupts the business underneath it has failed at something, even if the roof is perfect.
Get the Roof Surveyed and the Options Priced
Bring us the ponding, the recurring leak over the stockroom or the roof you inherited with the building. We will survey it, core it where its history is unknown, and price the real options side by side.
(682) 474-1411Scope your low-slope roof — (682) 474-1411